Efficia DFM100

defibrillator / monitor

The Efficia DFM100 is an affordable solution with the ability to adapt to changes in your clinical environment, resource needs, or critical care guidelines.

The Efficia DFM100 is an affordable solution with the ability to adapt to changes in your clinical environment, resource needs, or critical care guidelines.

Dependable and easy-to-use  

Readiness:

The Efficia DFM100 signals its readiness with an active, flashing hourglass that shows the results of automated self tests, and front-panel LEDS that indicate power status—giving you a clear indication the device is ready for immediate use.

Response:

The Efficia DFM100 is small, lightweight and easy to carry with optional ruggadized, wrap-around carrying case –you can rapidly bring the device to the patient’s side.

Defibrillation:

Intuitive controls and clear voice prompts guide you through the steps of defibrillating the patient, with AED mode for basic life support providers. Advanced life support providers can choose therapeutic options using the SmartSelect knob to navigate quickly to deliver defibrillation or pacing therapy to the patient.

Monitoring:

The Efficia DFM100 uses the same ports for clinical measurements as Philips patient monitors, so no time is wasted applying different lead sets and cables to the patient on arrival in the hospital.

Handover:

The Efficia DFM100 collects and trends data for up to 8 hours of continuous monitoring, for incident documentation and case review.

Specifications Show all

Physical characteristics
Filtration
Rechargeable Lithium Ion battery; AC power using a protectively grounded outlet
General
Approximate Dimensions
23.5 cm (H) x 29 cm (W) x 20.5 cm (D); 9.25 in (H) x 11.4 in (W) x 8 in (D)
Approximate Weight (without battery)
5.66 kg; 12.5 lbs
Standard Operator Position
Within one meter (3 feet) of the device
Power
Rechargeable Lithium Ion battery; AC power using a protectively grounded outlet
Display
Size
Approximately 7 in (17.8 cm) diagonal viewing area
Type
Color TFT LCD
Resolution
800 x 480 pixels (VGA) with 32 brightness levels per color
Wave Viewing Time
6.5 sec ± 10%
Sweep Speed
25 mm/s ± 10% nominal (stationary trace; sweeping erase bar) for ECG and SpO2; capnogram wave is 6.25 mm/s ± 10%
Defibrillator
Waveform
Biphasic Truncated Exponential; waveform parameters adjusted as a function of patient impedance
Shock Delivery
Via multifunction electrode pads or paddles
Charge time
• Less than 5 seconds to the recommended adult energy level (150 Joules) with a new, fully-charged battery installed
• Less than 6 seconds to the selected energy level (up to 200 Joules) with a new, fully charged battery installed
• Less than 15 seconds to the selected energy level while connected to AC power only
• The device powers on in manual defibrillation mode ready to deliver shock in less than:
• 15 seconds with a new, fully-charged battery
• The device powers on in AED mode ready to deliver shock in less than:
• 24 seconds with a new, fully-charged battery even after 15 discharges of maximum energy
Shock Series
Configurable energy escalation in a series Leads Off Sensing and PCI
Sensing for Pads/Paddles
Apply 500 nA rms (571 Hz); 200 uA rms (32 KHz)
Charge times
• Less than 5 seconds to the recommended adult energy level (150 Joules) with a new, fully-charged battery installed • Less than 6 seconds to the selected energy level (up to 200 Joules) with a new, fully charged battery installed • Less than 15 seconds to the selected energy level while connected to AC power only • The device powers on in manual defibrillation mode ready to deliver shock in less than: • 15 seconds with a new, fully-charged battery • The device powers on in AED mode ready to deliver shock in less than: • 24 seconds with a new, fully-charged battery even after 15 discharges of maximum energy
Patient Impedance Range
Minimum: 25 ohm (external defibrillation); 15 ohm (internal defibrillation) - Maximum: 250 ohm. Actual functional range may exceed these values